Young_Engineer
Member
Hey Guys,
I have received an Elau MAX-4 motion controller, and it beeps
When I try to connect via serial 232 and/or ethernet in EPAS-4 v24, I get nothing.
The ''power'' and ''bus err'' LEDS are constantley burning, right after power up.
Is it missing its Firmware?
Any help would be appreciated!
Greetings,
I have received an Elau MAX-4 motion controller, and it beeps
When I try to connect via serial 232 and/or ethernet in EPAS-4 v24, I get nothing.
The ''power'' and ''bus err'' LEDS are constantley burning, right after power up.
Is it missing its Firmware?
Any help would be appreciated!
Greetings,