Find IP adress program in the PLC without the source program

[danielconstb1]

Hi

I need to find and IP of a drive profinet that bundown
The machine doesn't have the IP and name of device write and anywhere

It's a s7-1200 but I don't have the PLC program because everytime I tried to upload station to PG I get an error Could no determined offline........ and abort the upload

First question if I get only the IP is enough or I need the name of the device to ?

And there is an way to see what's the IP and name devices the PLC is reaching for ?

 

[AlfredoQuintero]

Hi and welcome to the forum.
The free version (unlicensed version) of the Profinet Commander lets you detect Profinet devices and assign device name and IP address by means of its DCP client function.
https://profinetcommander.com/download/

 

[Jkoso]

I think proneta could do the trick too.
https://support.industry.siemens.co...-diagnostics-tool-for-profinet?dti=0&lc=en-FI

 

[JesperMP]

It is the device name that is the important information.
Proneta can show you the drives device name if it is not completely dead.