fusionworks1
Member
Equipment- AB HMI PV600 2711-B6C20 Control Logix 1769L32E
Software- RSlogix 5000 and Panelbuilder 32
Problem- I have an analog signal back to processor and I am using a CPT instuction (Local6.I.Ch2Data-4000)/*1000/1600 which is calculating my data and putting it into a DINT N7[2] which is the Tag for the HMI. The number I am recieving is for example 384 but the actual proper value I want to display in the HMI is .384 Any suggestion out there
Software- RSlogix 5000 and Panelbuilder 32
Problem- I have an analog signal back to processor and I am using a CPT instuction (Local6.I.Ch2Data-4000)/*1000/1600 which is calculating my data and putting it into a DINT N7[2] which is the Tag for the HMI. The number I am recieving is for example 384 but the actual proper value I want to display in the HMI is .384 Any suggestion out there