Hi. I am new to the site and am trying to work out how to use Fluke Data Bucket 2635A to record the switching cycles of a 230V AC solenoid valve. I have the valve on a timer 5sec on 5 sec off and want to record the amount of cycles before fail. Does anyone know how to wire and program this. Any info would help, would chance it myself but concerned about linking up 230V to the Data Bucket:smas:. Cheers in advance for the help
Fluke Data Bucket
- Thread starter Donwan
- Start date
Similar Topics
So...
Long story short, some of our electricians struggle when asked to measure loops. A clamp on meter resolves this.
The Fluke 771 is a great...
Good Evening ,
I’m getting ready to integrate a Mettler Toledo IND 570 into a ControlLogix PLC , Analog 4-20 ma input card 1756-IF16 . I’m...
Does anyone have favorite place for Fluke 87V replacement parts? Mine sorta left my hand at a high velocity yesterday into my tool box, now the...
Some of my friends were at an auction and picked up a Fluke 714B Thermocouple calibrator because they thought it looked like something i might be...
We want to log three analog signals (2 X 4-20 ma + 1 x 24V DC).
Later on we want to plot the three signals on the same timebase.
We will be using...
