jgar65
Member
I am having trouble establishing communication between a PanelView Plus 7 Standard and a SLC5/05. A little background: This was a working setup until an operator pressure washed the touchscreen. We purchased a new PanelView and the integrator that did the program for the touchscreen will not come out. They sent us the .mer file and I loaded it. The screens come up but there is no communication between the PP+ and the 5/05. IP setting in both devices look good. PP+ (192.168.80.1:255.255.255.0) 5/05 (192.168.80.58:255.255.255.0) I can see both devices in RS Linx Classic. Since we got no where trying to get the integrator out here (they are local) we purchased a copy of FT View Studio ME. I did finally get a copy of the .med file from the company in the mean time. I figured it was a runtime target issue in the factory Talk Linx. I see both devices and added the path for the 5/05 in the runtime target. I have had zero success. Everything seems to be working correctly but I am missing something here. They did have a gateway address in the plc for the PP+. Since it was not working I removed it but I had the same results. Any help would be greatly appreciated!