FTE switch for Rx3i PLC System

[adnan_hayat88]

Hi,
I`m working on a project involving GE IP Rx3i controller. I have to create a redundant Ethernet connection. I have two ETM cards per rack. Please suggest how to implement it using a switch so that it serves the purpose of FTE

 

[RussB]

I recommend using the N-Tron 700 Series with redundant systems like the IC695CRU320 processors.

 

[adnan_hayat88]

Dear RussB,
Kindly tell can two ETM in one rack have the same Redundant IP Address. When these connections go in the switch will there not be an IP conflict. What about the Console Station. Can it have two Ethernet cards assigned with the same Redundant IP.