FTView ME v9.0 Keypad Protection

ticknert

Member
T
Join Date
Jul 2018
Location
Philadelphia
Posts
7
Hi everyone,

I'm working on an HMI with a screen that I'd like to protect. I'd like to have the operator enter a pin into a numeric keypad on a preliminary screen and if the value is correct, send the HMI to another screen. Have any of you successfully done this? I know that it's possible with user groups but I'd like to avoid the need to log in.

I'm led to believe that a macro is possibly the only way, but I'd like to do it without macros. Looking forward to hearing your responses!

Thank you
 

Similar Topics

R
How to read/write changes to an existing AB FTView SE program
Hello, I am fairly experienced programming and modifying existing FTView ME programs. I have also used FTView SE to make modifications to a...
Replies
5
Views
142
Operaghost
Operaghost
R
FTView Alarm Event Banner - How to configure alarm subscribe exception
Hi folks. I have a system that I'm working on that needs 2 alarms banners with different event subscription: - One banner for a specific area...
Replies
6
Views
228
Cheeseface
C
M
Scada FTView SE
Hello guys please I want experience with this I am currently working on a scada project using FTView SE and I have an Ethernet IP local area...
Replies
0
Views
65
Mahmoud92
M
C
FTView global object - text vs String
I am creating a global object in FTView SE 13. I want to have a string read from the PLC and display (in this case the tagname). So lets say...
Replies
4
Views
222
cjjeeper
C
E
FTView ME: Can you set CurrentUserHasCode value from a PLC tag?
I want to set user security level based on the value of a tag in my PLC called "ActiveUser". That tag will contain the A-P code which we use for...
Replies
6
Views
275
robertmee
R
Back
Top Bottom