At this past TechEd I purposely took a ME lab so I could show the "engineers" some issues. They acknowledged the things I mentioned but I doubt it will go any further. There are bugs from early on (pre v5) that still aren't fixed. The fact that there isn't the ability to do simple scripting is sad. I should be able to write a script or function that can call a display and write to the PLC on a single button press. While it's possible to do this, it's WAY too complicated. I really dislike using their HMI software. If it was free or low cost, maybe I could excuse things more. But their software is overpriced, and the support is extra.