milmat1
Member
Engineers and designers, question.
Do you typically fuse the PLC outputs ?
I see some that are fused and many that are not. I typically fuse the AC outputs, but rarely the DC.
And sometimes I consider what the load is going to be. Pilot lights, relay's or solenoid valves etc.
Just curious about your thoughts and practices??
Thanks
Matt
Do you typically fuse the PLC outputs ?
I see some that are fused and many that are not. I typically fuse the AC outputs, but rarely the DC.
And sometimes I consider what the load is going to be. Pilot lights, relay's or solenoid valves etc.
Just curious about your thoughts and practices??
Thanks
Matt