khmersarom
Member
Hi,
The company I work for have the following:
Intellution FIXMMI 6.0 software which I installed on an old computer running Wndows 98 second edition. Have a software key connectd to the printer port.
GE Fanuc PLC Hand Held Programmer
IC693PWR321 power supply rack 0
IC693CPU331-BB CPU module, slot 1
IC693CMM311N communication control module, slot 2
IC693ALG221E input Analog, 4 current, slot 3
IC693ALG221E input Analog, 4 current, slot 4
IC693ALG221C input Analog, 4 current, slot 5
All I want to do is be able to read the temperature from 6 tanks and a boiler pressure. The program was lost when we upgraded our computer so I'm starting from scratch. I'm new to PLC programming. Can someone point me in the right direction? Thanks in advance.
The company I work for have the following:
Intellution FIXMMI 6.0 software which I installed on an old computer running Wndows 98 second edition. Have a software key connectd to the printer port.
GE Fanuc PLC Hand Held Programmer
IC693PWR321 power supply rack 0
IC693CPU331-BB CPU module, slot 1
IC693CMM311N communication control module, slot 2
IC693ALG221E input Analog, 4 current, slot 3
IC693ALG221E input Analog, 4 current, slot 4
IC693ALG221C input Analog, 4 current, slot 5
All I want to do is be able to read the temperature from 6 tanks and a boiler pressure. The program was lost when we upgraded our computer so I'm starting from scratch. I'm new to PLC programming. Can someone point me in the right direction? Thanks in advance.