Chris Mosley
Member
Hello All,
I am using Cimplicity Machine Edition (TM) v4.50 Build 3173 and programming using State Logic, I have configured a CPX935.
I have a single Task called "Alarm_Monitoring". In this task there are several states, one of which is "Monitor_Alarms", this state contains the following statement:
If Reactor_Temperature is greater Maximum_Temperature, then go E_Stop State
Upon validating I get the following error:
Error 8911: Error in conditional at "value"
Seconds keyword is missing in if statement or synonyms of if.
Removing the keyword stop has no impact and the same errors are generated, however, replacing "greater" with ">" generates an addition error:
Error 8933: Undeclared variable : "maximum_temperature"
Although the variable "Maximum_Temperature" is clearly defined in the variable tab of the navigator.
Any feed back on what is causing these errors and how to fix them will be greatly appreciated.
The statement after changing it that causes 2 errors is:
If Reactor_Temperature > Maximum_Temperature, then go E_Stop State.
Thanks in advance for your help.
Regards,
Chris Mosley
I am using Cimplicity Machine Edition (TM) v4.50 Build 3173 and programming using State Logic, I have configured a CPX935.
I have a single Task called "Alarm_Monitoring". In this task there are several states, one of which is "Monitor_Alarms", this state contains the following statement:
If Reactor_Temperature is greater Maximum_Temperature, then go E_Stop State
Upon validating I get the following error:
Error 8911: Error in conditional at "value"
Seconds keyword is missing in if statement or synonyms of if.
Removing the keyword stop has no impact and the same errors are generated, however, replacing "greater" with ">" generates an addition error:
Error 8933: Undeclared variable : "maximum_temperature"
Although the variable "Maximum_Temperature" is clearly defined in the variable tab of the navigator.
Any feed back on what is causing these errors and how to fix them will be greatly appreciated.
The statement after changing it that causes 2 errors is:
If Reactor_Temperature > Maximum_Temperature, then go E_Stop State.
Thanks in advance for your help.
Regards,
Chris Mosley