Electrically_Bound
Member
Does anybody here have a manual for the DC-300. I have the tiny manual that discusses some of the fault codes and common parameters, but I'm needing the full blown manual.
Here is my problem:
I am trying to modify parameter 074 (tach pulses per revolution). To make changes,jumper 13 must be in the 2-3 position and there must be an odd number in parameter 003. Despite doing this, I keep getting errors FL06 and FL043. If anybody has encountered such a problem, I would greatly appreciate the help.
Here is my problem:
I am trying to modify parameter 074 (tach pulses per revolution). To make changes,jumper 13 must be in the 2-3 position and there must be an odd number in parameter 003. Despite doing this, I keep getting errors FL06 and FL043. If anybody has encountered such a problem, I would greatly appreciate the help.
