adel abd el aziz
Member
Dear all,
I want to know if IC697CPU780 support IC697CMM742 or not
Adel
I want to know if IC697CPU780 support IC697CMM742 or not
Adel
ge
- Thread starter adel abd el aziz
- Start date
According to GFK-1066.xls on the GE Fanuc web site it is but,
"SERVER MODE ONLY POSSIBLE WITH: CPU780 VER 4.60"
I am not sure what limitations that may have and I believe that it means that you need at least version 4.60 of the CPU to have "Server Mode".
You should check with your local supplier for details.
"SERVER MODE ONLY POSSIBLE WITH: CPU780 VER 4.60"
I am not sure what limitations that may have and I believe that it means that you need at least version 4.60 of the CPU to have "Server Mode".
You should check with your local supplier for details.
Maman
Member
Dear
Ihave one plc GE FANUC 90-30 CPU 331 but I have not Software...... any Help me.......
Thanks
Ihave one plc GE FANUC 90-30 CPU 331 but I have not Software...... any Help me.......
Thanks