get and set time picker value in citect scada process analyst via cicode

z.saadati

Member
Z
Join Date
Aug 2017
Location
ney
Posts
1
I want to get and set Time Picker value in process analyst in citect scada using cicode.

Also I tried to find an event or function when time picker value is changed , is called but find nothing.

May you help me please?
 

Similar Topics

N
DVP-14SS2 program does not Run after Power Reset
Hi, i am using DVP-14SS2 PLC, after program written to plc, when power is reset, plc doesn't run. always need to connect to pc for the run mode.
Replies
0
Views
25
nadeem2nazar
N
J
Emergency Stop reset Siemens
Hi need help why this “failure 5 emergency stop “ appears at every startup in the morning ? Have to shut off main switch at least 10 times on...
2
Replies
19
Views
313
John Lee
J
K
Omron AD081-V1 Analog Input Card Calibration (Offset & Gain Adjustment)
Omron AD081-V1 Analog Input Card Offset & Gain Adjustment Entering Adjustment Mode 1. Set the input card in adjustment mode (Turn ON Dip SW No-1)...
Replies
0
Views
88
Ko Lin
K
D
Reset PLC Horner?
I was loading a program onto an XE1e2 PLC and it got stuck on these two windows and won't progress. It won't let me connect from the PC to reload...
Replies
0
Views
77
Data_name
D
moistcat
Factory Reset 4RF Aprisa SR+
Hi all, i have recieved some 4RF Aprisa SR+ ethernet radios from a customer to configure. Issue is that they are used and have non-default...
Replies
0
Views
83
moistcat
moistcat
Back
Top Bottom