I am having difficulty getting online with an Automation Direct BRX processor. Model number is BX-DM1E-M.
Have set an IP address through USB initially, but when trying to connect to it with an ethernet cable, the processor does not recognize it.
When trying to set up a link, the MAC address doesn't even show up.
I have set these things up before. AD stuff is usually pretty straight forward, but this one has me scratching my head.
Am helping a colleague with his home project. Standalone processor with a C-more micro. I can communicate with the C-more OK. Everything is connected through an unmanaged switch.
My colleague built and programmed the setup. He is asking for help because the touchscreen is not communicating with the processor.
Watched several videos on line to make sure I wasn't missing anything, but have had no success yet.
Any suggestions are welcome.
Thank you
Have set an IP address through USB initially, but when trying to connect to it with an ethernet cable, the processor does not recognize it.
When trying to set up a link, the MAC address doesn't even show up.
I have set these things up before. AD stuff is usually pretty straight forward, but this one has me scratching my head.
Am helping a colleague with his home project. Standalone processor with a C-more micro. I can communicate with the C-more OK. Everything is connected through an unmanaged switch.
My colleague built and programmed the setup. He is asking for help because the touchscreen is not communicating with the processor.
Watched several videos on line to make sure I wasn't missing anything, but have had no success yet.
Any suggestions are welcome.
Thank you