Hi all,
I am looking for a manual of the Goldstar make STARCON A48 PLC. The PLC consists of a CPU unit type no. A48P and several I/O units.(The PLC consists of four status leds i.e. PWR, RUN, MEM and CPU). When the PLC is powered ON, the following conditions are observed.
> Only the PWR and CPU leds lit ON
> The MEM led lits only for a second at power up & then remains OFF.
> The RUN led remains OFF at all times.
I cannot figure out the exact status of the PLC.
Does anyone have the manual for the PLC??
Regards,
Ritesh.
I am looking for a manual of the Goldstar make STARCON A48 PLC. The PLC consists of a CPU unit type no. A48P and several I/O units.(The PLC consists of four status leds i.e. PWR, RUN, MEM and CPU). When the PLC is powered ON, the following conditions are observed.
> Only the PWR and CPU leds lit ON
> The MEM led lits only for a second at power up & then remains OFF.
> The RUN led remains OFF at all times.
I cannot figure out the exact status of the PLC.
Does anyone have the manual for the PLC??
Regards,
Ritesh.