For the Siemens gurus
The Siemens board in Citect is
Board Name - Board1
S7NT
Address 0
Special Opt CP_L2_1:
Port is
Port1_Board1
Port1
Special Opt VFD1
I/O Device is
pbs7Dev01
Port1
Address PBS75412
Port1_Board1
Protocol S7ND
I am aware that I require either a PCI or PCI-E card
Do I require Simatic Softnet as well?
Is there anything else I require?
If I need Simatic Sofnet is there anything to set up there or Will Citect just use the driver?
I guess the latter as thge PLC is obviously set up correctly.
Thanks for any help you can give me.
The Siemens board in Citect is
Board Name - Board1
S7NT
Address 0
Special Opt CP_L2_1:
Port is
Port1_Board1
Port1
Special Opt VFD1
I/O Device is
pbs7Dev01
Port1
Address PBS75412
Port1_Board1
Protocol S7ND
I am aware that I require either a PCI or PCI-E card
Do I require Simatic Softnet as well?
Is there anything else I require?
If I need Simatic Sofnet is there anything to set up there or Will Citect just use the driver?
I guess the latter as thge PLC is obviously set up correctly.
Thanks for any help you can give me.