help a newby

I would say you have a few choices.

1) Try USB to serial then use serial cable. I have always used the AB cable but I think it simply a null modem cable

2) PCMK card and cable. Look on E-bay they usually have some listed look for series B and appropriate cable 5/03 or lower or 5/04
 
I assumed you are talking about SLC 5/03 onwards cos those are the models with the RS232 function. You could always use the DH485 channel, with a 1747-CP3 cable. I believe most laptops have the RJ45 pluggin.

regards
Sherine T.
 
Search on here for Keyspan. They make a USB to serial adaptor that does work and will autoconfigure for DF1 protocol.

Regards Alan Case
 

Similar Topics

Hi, I have an SLC 5/04 (541) in a 10-Slot rack with the following hardware installed :- 1746-BAS in Slot 1 3150-MCM (Prosoft Modbus) in Slot 2...
Replies
2
Views
4,737
I've adjusted the IP of the Panelview Plus as well as the DNS servers; the screen does not show up in the search when I go to the transfer utility...
Replies
3
Views
71
Hi Everyone, I own a GE Versamax controller that I purchased for a class at Long Beach City College a couple of years ago. I lost the use of my...
Replies
1
Views
44
I was wondering if anyone could help i am trying to use a SLC 500 with a 5/05 processor to set up an incremental encoder to a HSCE2 card? The card...
Replies
1
Views
91
Hello, I am working with cimplicity workbench, I have made changes to the current project from this machine I am using in the past. However when...
Replies
0
Views
45
Back
Top Bottom