Help! Fatek PLC FBs-60MA upload prg

dividezero

Member
D
Join Date
Jan 2017
Location
Bangalore
Posts
1
Hi,
I am trying to upload the program from the PLC to the PC using the Winproladder software. When I click the On-line under PLC, the following error is displayed (png attached)🔨
Does anyone know why I might be getting this error.


Thank you

Fatekplcerr.jpg
 

Similar Topics

P
FATEK PLC FBs-60MC need help
Hello all! We are using a FATEK PLC FBs-60MC model, and when we tried to connect with our WinProllader software to check the PLC program, there is...
Replies
1
Views
1,639
roxtech
R
R
[Help] WinProLadder - FATEK
Good Day! Can anyone help me to retrieve an existing program in a PLC (FATEK-60MA) using WinProLadder? I tried to connect to the PLC using...
Replies
2
Views
3,960
renHiatus
R
ydtech
Fatek analog input help
I'm saddled with a Fatek FBs-40MC with 2 FBs-6AD modules. If I understand the manual correctly the readings should automatically transfer to R3840...
Replies
3
Views
2,992
ankitjain
A
T
Anyone here work for Johnson Controls now or in the past?...need help with OLD PLC program
I have an old Sentry Palletizer (S/O Number 3007 / Serial Number 1172) that has lost its program as the backup battery died years ago. I can...
Replies
0
Views
86
TheCaptain2000
T
C
Can you help me with this problem? (Fibonacci sequence in tia portal)
Hello, I need to write the following program in Ladder language, but I could not integrate the Fibonacci sequence into the ladder. Can you help...
2
Replies
22
Views
458
JesperMP
JesperMP
Back
Top Bottom