Hello, I am very new to PLCs and I need some help. I have an existing network of 5 SLC 5/03 CPUs which are attached (daisy chained) to 5 1747-AICs. I am wanting to hook up 1 PC to this network. The PC does not have a serial port just USB ports. What would be the best way to hook this up. Thank you.
Help hooking up PC to existing network.
- Thread starter SnakeEyes
- Start date
Ken Roach
Lifetime Supporting Member + Moderator
Easy.
You need a 1747-UIC. This is a USB/DH485 converter.
It will plug into the Peripheral port on one of the 1747-AIC isolators and allow your PC access to any of the SLC-5/03 controllers.
This document has a good diagram of the wiring:
http://literature.rockwellautomation.com/idc/groups/literature/documents/in/1747-in062_-mu-p.pdf
You need a 1747-UIC. This is a USB/DH485 converter.
It will plug into the Peripheral port on one of the 1747-AIC isolators and allow your PC access to any of the SLC-5/03 controllers.
This document has a good diagram of the wiring:
http://literature.rockwellautomation.com/idc/groups/literature/documents/in/1747-in062_-mu-p.pdf
Similar Topics
I have an old Sentry Palletizer (S/O Number 3007 / Serial Number 1172) that has lost its program as the backup battery died years ago. I can...
Hello, I need to write the following program in Ladder language, but I could not integrate the Fibonacci sequence into the ladder. Can you help...
this a program to send data to barcode printer I want to integrate a new printer in a new machine and i wanted to adapt the old prgram on it but I...
So i've been at this for a long while, i have Citect Scada 2018, i have full access to everything but i can't seem to find any option or...
Hi all, hope you are having a great day,
I am in need of your help to create a AOI or program that does this kind of job:
I have a IO Link...