Need to change, via Ethernet, the IP address for a CP 343-1 S7-1EX11-0XE0 installed in slot 4 of a rack with a CPU 318-2 S7-2AJ00-0AB0.
Requirements for Downloading (Siemens manual):
To download firmware, you require an Industrial Ethernet CP module in the
PG/PC (for example, CP 1613) or a normal Ethernet module with the “Softnet”software package.The S7-ONLINE interface must be set to the “ISO - Industrial Ethernet”protocol. It is not possible to download using TCP/IP (and therefore not to other networks).
Requirements for Downloading (Siemens manual):
To download firmware, you require an Industrial Ethernet CP module in the
PG/PC (for example, CP 1613) or a normal Ethernet module with the “Softnet”software package.The S7-ONLINE interface must be set to the “ISO - Industrial Ethernet”protocol. It is not possible to download using TCP/IP (and therefore not to other networks).
But when I try to set the PG/PC interface I can't install the CP1613 module
(the install button is shaded). Just to make things worse, now I am getting an error message that reads something like:
"Assign Profibus interface parameters to S7ONLINE access point"
Some clues anybody? Maybe a different way to do it? Any help will be greatly appreciated.
Thank you
(the install button is shaded). Just to make things worse, now I am getting an error message that reads something like:
"Assign Profibus interface parameters to S7ONLINE access point"
Some clues anybody? Maybe a different way to do it? Any help will be greatly appreciated.
Thank you