Hello All,
I have a system of 2 PLCs Siemens CPU 315 - 2PN/DP (with a program Simatic S7 V5.5) and PC station runs Siemens OPC server Simatic net V7 ,and they are connected over Ethernet.
I want to upgrade the PC station , so i installed SIMATIC net V15 to be compatible with Windows Server 2012 R2 (my new station).
and here i have the problem:
Any Idea how to solve this problem , i need an OPC server V15 communicate with 2 PLC running on Simatic Step 7 V5.5
Thanx for u all ,
Wisam
I have a system of 2 PLCs Siemens CPU 315 - 2PN/DP (with a program Simatic S7 V5.5) and PC station runs Siemens OPC server Simatic net V7 ,and they are connected over Ethernet.
I want to upgrade the PC station , so i installed SIMATIC net V15 to be compatible with Windows Server 2012 R2 (my new station).
and here i have the problem:
The PLCs are ruuning under step 7 program V5.5 so i can not add OPC V15 in the HW configs.
When I try to migrate the project from S7 to V15 it comes with alot of errors .
I tried to export the blocks(.AWL) and the hardware configs (.cfg) then import it in TIA portail V15 , it generates a lot of error for the FCs that have been built in STL , and i could not import the hard ware configs from the .cfg file in TIA portail
Any Idea how to solve this problem , i need an OPC server V15 communicate with 2 PLC running on Simatic Step 7 V5.5
Thanx for u all ,
Wisam
Last edited: