Hi all!
I'm new at PLC Programming and will need to program a Siemens S7-300. I've never had before. All what i've done with siemens were some modifications on an already made software.
I've all the logic that i would need an it doesn't look difficul but the problems are programming that to the PLC.
What should i considerer ?
There usual rules to start programming?
What would be the Steps after Configuring Hardware on Simatic Manager?
What is the OB1 behavior!
And if you have give some sources to search!
Thanks!
Pago
I'm new at PLC Programming and will need to program a Siemens S7-300. I've never had before. All what i've done with siemens were some modifications on an already made software.
I've all the logic that i would need an it doesn't look difficul but the problems are programming that to the PLC.
What should i considerer ?
There usual rules to start programming?
What would be the Steps after Configuring Hardware on Simatic Manager?
What is the OB1 behavior!
And if you have give some sources to search!
Thanks!
Pago