MorphuisOGrady
Member
Hi there,
FactoryTalk SE experts can you help me with this one please.
The SE numeric keypad is horrible and not suited for my application so I made my own on a display.
The numeric keypad is basically just all the numbers on buttons. On each button press I use the Send Keys "x" command to write to the tag.
So when i load the display i pass a tag parameter PIN_NUMBER. On the display I have a numeric display connected to #1.
The problem is the data does not get written to tag PIN_NUMBER (DownloadALL command) unless I place a numeric input on display and click it before I start pressing the numbers. Then it will work.
Any ideas how to get around this, i.e bring the numeric input into focus upon loading of display?
FactoryTalk SE experts can you help me with this one please.
The SE numeric keypad is horrible and not suited for my application so I made my own on a display.
The numeric keypad is basically just all the numbers on buttons. On each button press I use the Send Keys "x" command to write to the tag.
So when i load the display i pass a tag parameter PIN_NUMBER. On the display I have a numeric display connected to #1.
The problem is the data does not get written to tag PIN_NUMBER (DownloadALL command) unless I place a numeric input on display and click it before I start pressing the numbers. Then it will work.
Any ideas how to get around this, i.e bring the numeric input into focus upon loading of display?