sparkytex
Lifetime Supporting Member
Hey guys,
I have to get my Compact Logix L32E to message between a ScadaFlex module via SLC 500 peer to peer protocol. Since the SLC 500 is using 16 registers at N10:1. I have to get my Tag “Data_For_SF” which is a dint data type with an array of 16 into an N11:1 file somehow. I was told to use a integer data file but I’ve never heard Of or done anything like this before.
I also have to change the IP Address of my processor which has already been assigned. The reason for this is the tech who programmed the ScafaFlex modules used a different IP address for the message to communicate so it’s easier for me to change the IP address on this processor as it’s a stand alone processor.
How do I change the IP address? Do I just make the change offline and readdress the processor in module properties and re-download?
Yah is for the help.
- Tex
I have to get my Compact Logix L32E to message between a ScadaFlex module via SLC 500 peer to peer protocol. Since the SLC 500 is using 16 registers at N10:1. I have to get my Tag “Data_For_SF” which is a dint data type with an array of 16 into an N11:1 file somehow. I was told to use a integer data file but I’ve never heard Of or done anything like this before.
I also have to change the IP Address of my processor which has already been assigned. The reason for this is the tech who programmed the ScafaFlex modules used a different IP address for the message to communicate so it’s easier for me to change the IP address on this processor as it’s a stand alone processor.
How do I change the IP address? Do I just make the change offline and readdress the processor in module properties and re-download?
Yah is for the help.
- Tex