HMI 5056N using Easy Builder 5000

paramesh1990

Member
P
Join Date
Sep 2011
Location
Hosur
Posts
3
I am trying to connect HMI 5056N with a Baldor motion controller(NextMove ESB 2). Using EZ5000 (Easy Builder 5000) i am not able to select the model 5056N. Should i use some upgrade? I am not able to proceed further
 

Similar Topics

E
HMI and VFD's having momentary comms fault, No faults at PLC
I have a cell with a compact guardlogix as the plc and I have three hmi's and two vfd's on this cell. I been experiencing momentary comms faults...
Replies
10
Views
126
Nova5
N
L
How to mimic a modules LED status lights on HMI
What is the best way to show a modules LED status lights on an HMI screen? The module I'm trying to mimic is the 1756-DNB DeviceNet Scanner...
Replies
0
Views
51
LabRat906
L
M
HMI Connection - {::[PLC1]Program:#1.#3.Abc.Efg} What is the #1.#3 ?
I'm having a hard time either remembering or figuring this out. I have a PLC program and the associated HMI program. I know what this means...
Replies
4
Views
118
plvlce
P
X
Detection of HMI Status in the PLC ?
Hello, I'm working with Studio 5000 and ME Station, and I'm trying to find a way to detect if the PC with the HMI is shut down or not. I've tried...
Replies
6
Views
197
xivlionheartvix
X
N
RSLogix5000 --> C-More HMI; Array --> Text String
Hello everyone, Wondering if anybody can help me with this: I have a CompactLogix processor running a little robot cell. Every 200 cycles...
Replies
8
Views
188
nutcase511
N
Back
Top Bottom