HMI (cmg2) keytrap & boot issues

sandy123456

Member
S
Join Date
Apr 2014
Location
ras al khaimah
Posts
2
Hi all...

Our hmi (cmg2) made by SEG is struck at the boot process. It is running on WINDOWS NT ver.4. Is there any possibility to get it right?

Secondly keytrap is not allowing me to open windowmaker even though execution of startup folder is disabled by pressing shift key during boot process.

Can anybody explain how to disable this keytrap?

thanks in advance for your help...
 

Similar Topics

A
Trying to get copy of Red Lion G315 HMI program but support upload was not ticked.
Hi All, As a precaution my company has been collecting copies all the HMI and PLC programs. I have recorded copies of most of our sites...
Replies
0
Views
43
Angus_Fergusson
A
S
TIA-portal - Adding connection to HMI in a different project
Hello all! So I have one project with a S7-1214 and a MTP1500 "Project1" and one project with another S7-1214 "Project2". Both of these PLC:s need...
Replies
6
Views
72
swedeleaner
S
S
How to Open Third Party APK(Like chrome or Any other software)From Factory Talk view HMI
I am using Factory Talk view Machine Edition Runtime HMI. I want to configure on button in such way that when i press this button I want to...
Replies
3
Views
145
hardaysknight
H
T
PLC Delta DVP 12SE and HMI Kinco GL043E not propperly connecting
Good Day to all of you, this is my first post, i will try to explain as best as possible, english is not my natural language. I am performing an...
Replies
0
Views
58
Tecnolaundry
T
B
HMI GRAPHICS MISSING_WINCC UNIFIED V18.UPD3
Does anyone happen to know how to install the graphic picture in HMI when I go into blower selection there are no graphics shown not only blower...
Replies
1
Views
78
Jkoso
J
Back
Top Bottom