Hmi

[set-csg]

Hi everybody,

I am programming S7, but my knowledge in HMI is ZERO. I'm requesting everybody who are expert in this field to please help me by recommending readings or website to start with. Any help that you would extend to me, which will eventually leads me to use WINCC FLEX or WINCC SCADA is very much appreciated. GOD BLESSED and thanks to all.

SET-CSG

 

[JesperMP]

This Siemens product site for WinCC Flexible and WinCC:
https://mall.automation.siemens.com/GB/guest/index.asp?aktprim=0&lang=en&nodeID=10007488&foldersopen=-1306-3184-3268-3269-&jumpto=3269

You can get unbiased advice on this site.
Try to describe what your requirements will be.

In short, WinCC Flexible is for single machines or small processes, whereas WinCC is for large processes.

 

[manmeetvirdi]

hi

you can also the download the Demo project of your HMI from :http://support.automation.siemens.com/WW/view/en/22900091
but first look for these Demo projects in CD's which comes with WinCC Flexible

 

[guppythePLCMan]

Hi there,

try the getting starteds from winCC flexible from the customer support site support.automation.siemens.com. They'll be a great help for you.. ;-)


Regards,

Guppy

 

[set-csg]

To: JESPER,MANMEETVIRDI,& GUPPY:

THANKS TO YOU GUYS. GOD BLESSED.

SET-CSG