i am doing project in controlling the weighing system i have a hopper with screw feeder in which i have to control the flow according to the signal from weighing machine ...i am getting the output in hyperterminal through RS232 but not in PLC i am using AB PLC micrologix1500.. please find me the solution
how to connect loadcell with AB plc
- Thread starter raam
- Start date
Similar Topics
Hello i have bought a S7-1200 (https://mall.industry.siemens.com/mall/uk/uk/Catalog/Product/6ES7212-1AE40-0XB0)
I have bought a loadcell and a...
Hi,
We have been facing a issue with SCADAPack 474. Configuration is like below.
RTU 474 + 6103 PS + 5606 IO Mix Module + 5414 DI Module
Only...
The past week we received a new piece of equipment from Germany which utilizes siemens controls. Typically in our company we use A.B. controls for...
I'm using a SLC typed write from the ControlLogix5572 to the MicroLogix 1400, with path: 2, (MicroLogix IP). The ControlLogix equipment has a...
Hello, As part of our project, we are using an M241 controller. This controller interfaces with an industrial computer and a router via a switch...