how to set the size correctly with data archive on wincc flexible 2008

JEANST

Member
Join Date
Jun 2015
Location
PARIS
Posts
68
Hello
i have currently a problem
with data archive that are used to display on trends

i have approximately 50 tags recording with an update rate of 10s.
the Customer wants to have a recording on the last 24hsours max on the trends.

I encounter the following problem, it works fine and after a couple of hour the recording stops and then nothing more appears on the trends.
I have tried several cards to record. CF card USB key MMC card... always the same problem. works ok then stop recording..

I Wonder if the number of records is not too small.?

if someone knows this problem..

Thanks in advance

29-06-2017 15-05-53.jpg 29-06-2017 15-06-50.png 29-06-2017 15-07-32.png 29-06-2017 15-07-44.png 29-06-2017 15-08-55.jpg
 

Similar Topics

Is there anyway to dynamically alter the size of a data block? I'm developing sofware to simulate a 'Last In First Out' structure using a data...
Replies
2
Views
1,768
Hi need help why this “failure 5 emergency stop “ appears at every startup in the morning ? Have to shut off main switch at least 10 times on...
Replies
19
Views
308
Omron AD081-V1 Analog Input Card Offset & Gain Adjustment Entering Adjustment Mode 1. Set the input card in adjustment mode (Turn ON Dip SW No-1)...
Replies
0
Views
88
I was loading a program onto an XE1e2 PLC and it got stuck on these two windows and won't progress. It won't let me connect from the PC to reload...
Replies
0
Views
75
Hi all, i have recieved some 4RF Aprisa SR+ ethernet radios from a customer to configure. Issue is that they are used and have non-default...
Replies
0
Views
81
Back
Top Bottom