silva.foxx
Member
Hi
I've come across a 0-10v analogue input into a 4-20mA analog input card... and the system appears, well is working.
The plc is a Siemens S5 115. The card is a "half card" 6ES5-463* which only shows it as current loop configurable.
A change in the input results in a PIW value change when monitored.
How can this be?
What's the drawbacks?
Thanks in advance
s.f
I've come across a 0-10v analogue input into a 4-20mA analog input card... and the system appears, well is working.
The plc is a Siemens S5 115. The card is a "half card" 6ES5-463* which only shows it as current loop configurable.
A change in the input results in a PIW value change when monitored.
How can this be?
What's the drawbacks?
Thanks in advance
s.f