nuttaphong191
Member
I have some error of communication with PLC Omron CJ1G by use USB link Rs232 i can't transfer program finish who have this problem before help me soft this problem
I have some error of communication with PLC Omron
- Thread starter nuttaphong191
- Start date
Similar Topics
Hi,
I have setup the Simple PLC communication in RJ71C24 (Channel 2) for communication between Mitsubishi IQ-R series PLC (Mosbus RTU Master) and...
Howdy,
I'm trying to connect to an SLC 5/04 using an old Toughbook running windows XP over the RS-232 port.
Cable 1761-CBL-PM02
RSLinx Classic...
I Want to program weintek hmi MT8071ie with ethernet port to Mitsubishi Electric Q06UDEHCPU but while setting parameter in easy builder pro plc...
Hi guys,
I would like to know why this fault alarm is coming "Master PLC Module communication TCP/IP error slot 3. My CPU 317 2 PN/DP. I checked...
Recently always have the communication error between Beckhoff ipc and plc, anyone can help, it is setting problem or hadware probelm,many thanks...