David B
Lifetime Supporting Member
Can anyone tell me why a programmer would move all the inputs and outputs on the PLC to the B3:xx/xx files the first thing in the program and the make all the addresses in the logic B3:xx/xx? The drawings all reference input and output numbers i.e. I:xx/xx but then one must figure out that input in the ladder logic.I cannot see the use in wasting time and processor memory to make the program harder to follow. To make matters worse, I cannot get the version of the program with descriptors to go onlline so I'm left monitoring the operation with a program with no descriptors. I am not a programmer so I may well be missing something. The processor is a Micrologix 1500, using RSLogix 500.
Thank you in advance
David Butler
Thank you in advance
David Butler