ashish2pat
Member
Hi All,
I want to know PowerFlex tag stucture.
I have question regarding this.
1) Like in Control Logix we can define/Create Tags. Can we create tags like this in PowerFlex.
I am asking this because in Drive Executive tool I have seen that if we create new device it will ask you device type like Powerflex 70 , 700,70EC , 70 AC after that it will ask you main board version and after that it will ask configuration version.
doing this and clicking on Finish botton it will show you configuration with groups and tags like Motor,Motor control till this point we have not connected to any IP but it is creating this configutaion.
2) I want to understand PCCC command formate for Powerflex 70 EC device.
I read DF1 document but I dont know command paramenter formate and stucture.
Can you please help me how I should understand this PCCC commands.
3) Can I get configuration from Powerflex device from CIP or PCCC protocol programatically.
Can you please help on above questions.
Thanks in advance.
I want to know PowerFlex tag stucture.
I have question regarding this.
1) Like in Control Logix we can define/Create Tags. Can we create tags like this in PowerFlex.
I am asking this because in Drive Executive tool I have seen that if we create new device it will ask you device type like Powerflex 70 , 700,70EC , 70 AC after that it will ask you main board version and after that it will ask configuration version.
doing this and clicking on Finish botton it will show you configuration with groups and tags like Motor,Motor control till this point we have not connected to any IP but it is creating this configutaion.
2) I want to understand PCCC command formate for Powerflex 70 EC device.
I read DF1 document but I dont know command paramenter formate and stucture.
Can you please help me how I should understand this PCCC commands.
3) Can I get configuration from Powerflex device from CIP or PCCC protocol programatically.
Can you please help on above questions.
Thanks in advance.