IDEC FC5A Slim Type CPU HSC setup

locotumbler

Member
L
Join Date
Jan 2013
Location
Otsego, MN
Posts
98
I am going to be using 3 high speed counters. I am going to be defining the high limits from a data register to be set on my HMI. I am just posting here to see if any of you out there have used one of these and if this appears to be all kosher.
 

Similar Topics

J
Idec PLC Upgrade - FC5A to FC6A
I'm involved in upgrading an IDEC FC5A-D12S1E PLC to a FC6A-D32P3CEE. I've attached the original layout of the system. Since then, another HG3G...
Replies
0
Views
447
johnd_125
J
O
IDEC FC4A & FC5A - Host Communication Error
FC4A (Analog Input Card) plugged in to FC5A (PLC) using phoenix connection on the side. I am doing a temperature reading. But screen reads host...
Replies
5
Views
2,554
Obravim
O
D
modbus idec fc5a to g306 via enet.
Reading data from the FC5 on the 306 screen. But I have a problem with the operation of a internal relay in the fc5 from a tag on the 306. Using...
Replies
0
Views
1,601
David Korenke
D
C
Connecting IDEC FC5A-D16RK1 with usb-r232 adaptor
Has anyone connected their IDEC PLC with a usb-rs232 adaptor? Which adapters work and which don't? Thanks
Replies
3
Views
1,679
colehan
C
V
IDEC MicroSmart Pentra FC5A-C24R2 RXD/TXD through RS-232C
Hello everyone, This time I have IDEC MicroSmart Pentra FC5A-C24R2 and using WindLDR v5.01 software for programming. This PLC is connected to...
Replies
1
Views
3,326
drumcode
D
Back
Top Bottom