mohitkataria012
Member
Hi All,
As i am new to STL programming I am facing a problem with the code below
OPN DB 103
A M [DBD 140]
= M 206.0
A M [DBD 384]
= M 206.2
OPN DB 104
A M [DBD 20]
= M 206.1
what i understood from the code above is that
1) open db 103
2) Load the value of db103.dbd140 in the memory bit. Let say value of dbd140 is 10.0
3) Now if M10.0 is high then it will make M 206.0 high.
Am i right??
Best Regards
Mohit_kataria
As i am new to STL programming I am facing a problem with the code below
OPN DB 103
A M [DBD 140]
= M 206.0
A M [DBD 384]
= M 206.2
OPN DB 104
A M [DBD 20]
= M 206.1
what i understood from the code above is that
1) open db 103
2) Load the value of db103.dbd140 in the memory bit. Let say value of dbd140 is 10.0
3) Now if M10.0 is high then it will make M 206.0 high.
Am i right??
Best Regards
Mohit_kataria