Excuse my ignorance but I am having a hard time figuring out where my real IO points are to address tags.
Please refer to attachments for screen shots.
I have three (3) IO modules tied to a 1756-A17 chassis.
1) In slot 1 I have a 1756-OA16 digital output module. When I create a tag for an output and I search for the output point I simply cannot find it. All I see are 32 points instead of 16 (see attachment 1756-OA16)
2) In slot 2 I have a 1756-IA16 digital input module. When I create a tag for an output and I search for the output point I simply cannot find it. All I see are 32 points instead of 16 (see attachment 1756-IA16)
3)In slot 3 I have a 1756-IF16 analog input module. When I create a tag for an output and I search for the output point I simply cannot find it. All I see are 8 channels instead of 16 (see attachment 1756-IF16)
Thank you very much for your help!
Please refer to attachments for screen shots.
I have three (3) IO modules tied to a 1756-A17 chassis.
1) In slot 1 I have a 1756-OA16 digital output module. When I create a tag for an output and I search for the output point I simply cannot find it. All I see are 32 points instead of 16 (see attachment 1756-OA16)
2) In slot 2 I have a 1756-IA16 digital input module. When I create a tag for an output and I search for the output point I simply cannot find it. All I see are 32 points instead of 16 (see attachment 1756-IA16)
3)In slot 3 I have a 1756-IF16 analog input module. When I create a tag for an output and I search for the output point I simply cannot find it. All I see are 8 channels instead of 16 (see attachment 1756-IF16)
Thank you very much for your help!