demond1984
Member
Hi,
I'm at the end of my rope here on an issue where I'm getting a I/O enable amber on a 200GBI module. 2 weeks ago the module went out an was exchanged with a new one and it was working fine for about 3 days and now it doesn't work at all. I've checked the cabling and it seems to be fine.
The weird thing is if I set the address to a number that is not addressed in the GBC, the I/O light turns green. Once I set it back, it returns. there is 5 other modules in series with this and all other are working just fine. I've tried swapping them out one that works and the problem is just isolated at this station.
Any help on this would be greatly appreciated .
I'm at the end of my rope here on an issue where I'm getting a I/O enable amber on a 200GBI module. 2 weeks ago the module went out an was exchanged with a new one and it was working fine for about 3 days and now it doesn't work at all. I've checked the cabling and it seems to be fine.
The weird thing is if I set the address to a number that is not addressed in the GBC, the I/O light turns green. Once I set it back, it returns. there is 5 other modules in series with this and all other are working just fine. I've tried swapping them out one that works and the problem is just isolated at this station.
Any help on this would be greatly appreciated .