Just posted. Guide for how to connect and configure a WinCC Flex panel to an S5 PLC.

[JesperMP]

If you shall ever have to make a WinCC Flexible panel in order to connect it to an S5 PLC via the PG port (for example for replacing an old defect operator panel), then be sure to read THIS guide !

 

[JesperMP]

The guide has been updated with some significant additions.
The link is the same.

 

[uptown47]

Jesper,

Great guide. Thanks for sharing.

;-)

 

[JesperMP]

Update: The guide has been corrected for an error pertaining to how the scaling of S5 timers should be done.
The link is the same.

 

[ayman metwally]

Thanks.