KepDirect Server would no communicate with an USB converter.
Has anyone had this problem? I move the same ladder file, same OPC file to a desktop computer with an RS232 port and everything works just fine, and I’m able to see the variable and outputs moving with both, KepDirect Server and DirectSoft32.
If I tried to do the same with my laptop using an RS232 USB converter then nothing happens I get a Bad (Out of Service) message with OPC Quick client, I tried two USB converters, the one from AD and another from Radio Shack, no luck.
My laptop is brand new; I do have good communication with DirectSoft32 using the same port and with both USB converters.
Anyone have a clue?
Thanks
Andy
Has anyone had this problem? I move the same ladder file, same OPC file to a desktop computer with an RS232 port and everything works just fine, and I’m able to see the variable and outputs moving with both, KepDirect Server and DirectSoft32.
If I tried to do the same with my laptop using an RS232 USB converter then nothing happens I get a Bad (Out of Service) message with OPC Quick client, I tried two USB converters, the one from AD and another from Radio Shack, no luck.
My laptop is brand new; I do have good communication with DirectSoft32 using the same port and with both USB converters.
Anyone have a clue?
Thanks
Andy