Jothiswarup
Member
Hello everyone,
I am using a L36ERM with 4 single axis kinetic 350 servos. They have been running fine for a month but suddenly today I got nF06 on all 4 of them. There are 40 ethernet devices connected to the PLC. Is this something related to ethernet comms or wiring? I get a communication fault on a LabView programmed HMI whenever this happens.
I am using a L36ERM with 4 single axis kinetic 350 servos. They have been running fine for a month but suddenly today I got nF06 on all 4 of them. There are 40 ethernet devices connected to the PLC. Is this something related to ethernet comms or wiring? I get a communication fault on a LabView programmed HMI whenever this happens.