Kaushals93
Member
Hello sir, i actually made a program on step7 micro/win, but i dont had simulator,from where i get the simulator for this..plzz help me out for this..
Kt
- Thread starter Kaushals93
- Start date
Jnoobs
Member
http://w3.siemens.com/mcms/simatic-controller-software/en/step7/simatic-s7-plcsim/pages/default.aspx
Above is PLCSIM from Siemens directly, or maybe this if its an S7-200 that you are using:
http://download.cnet.com/S7-200-Simulator/3000-2084_4-10976614.html
Above is PLCSIM from Siemens directly, or maybe this if its an S7-200 that you are using:
http://download.cnet.com/S7-200-Simulator/3000-2084_4-10976614.html
wimpiesplc
Member
PLCSIM is S7-300/400 only