Language issue with CX programmer(Omron)

[rejoe.koshy]

Hey Guys,
I have got a plc program developed in CX programmer which was originally commented in Chinese/Taiwanese. Now the comments which are being displayed currently on the program is gibberish. I need to make a few changes in the program and OEM cannot be reached.

Is there any way to convert the current language (gibberish) to its original language or better still English?

I am using CX programmer 9.7 .

Please help!

 

[IO_Rack]

CX Programmer does not use MS Windows language switching.

If you install the language on MS Windows you can perform an export of the gibberish then see the Chinese in a spreadsheet. From here you can translate from an online translator. You will not be able to view Chinese characters in CX Programmer without the Chinese version.

 

[rejoe.koshy]

CX Programmer does not use MS Windows language switching.

If you install the language on MS Windows you can perform an export of the gibberish then see the Chinese in a spreadsheet. From here you can translate from an online translator. You will not be able to view Chinese characters in CX Programmer without the Chinese version.

OK, so do I need to export the symbol table to excel?. If so, how can that be done?. (sorry, new to cxp)

 

[IO_Rack]

There is a Save Comment/Program but this is used for importing to another CX project.

Open the Symbol Table, perform a Select All (Ctl+A), copy then paste into Excel.