Lg Plc

josesaucedo

Member
Join Date
Nov 2005
Location
Van Nuys, CA.
Posts
78
Hello people.
I have a machine that had been down for trhee months without beeing turned on, now that I wanted to run it, I got error light on front of the PLC. Checked for power, it's OK. Does anyone think that the PLC failed becuse of the time that it was turned off?
Thanks.
 
If it has a battery for the CPU it may be flat.

If it doesn't have a battery then the capacitor has probably discharged.

If either of the above and you don't have an eprom then it is probably has lost it's program.

I don't know LG PLC's but I believe the above is correct for most.
 
I would call the company that made the equipment and see if they had backup program. I am sure they would. They would probly ask for the model number of the machine or some type of job ID.


DUNK
 
Whenever a PLC is going to be powered off for a long time it is a good idea to upload a backup of the program, and verify the battery is good.

Many PLCs use RAM, just like a PC, and what happens to your big Word document you didn't save when the power goes out? It's gone. The PLC's battery (or an EPROM or EEPROM memory card) are used to maintain the program when the power is off. If the battery is gone and there is no power, the RAM cannot be maintained.

As was stated, try to get a copy of the program from the machine builder. If not, you're looking at rewriting the program.
 
LG PLC?
Control Logix PLC battery lasts about 8 hrs after shutdown.
SLC 5/03,04,05 processor battery lasts about 9 month after shutdown
S5 Siemens processor battery lasts about 2 years after shutdown
S7 Siemens processor battery lasts about a week after shutdown

But...LG PLC? Didn't know LG made PLC other than appliances and TVs.
 
LG PLC?
Control Logix PLC battery lasts about 8 hrs after shutdown.
SLC 5/03,04,05 processor battery lasts about 9 month after shutdown
S5 Siemens processor battery lasts about 2 years after shutdown
S7 Siemens processor battery lasts about a week after shutdown

But...LG PLC? Didn't know LG made PLC other than appliances and TVs.

Yup same Korean company that makes the TVs. Schtick is free software and standard self made or store bought serial cables for programming
 

Similar Topics

HI everyone, i am new to Siemens plc programming and i am in need of some help. yesterday we had an S7-1200 CPU 1214C fail to turn on an output to...
Replies
5
Views
105
Hello, I have a Mitsubishi FX3G 14M PLC and a E615 HMI from Mitsubishi/Beijer. I'm using GXWorks 2 to do the programming and I have no problem...
Replies
3
Views
70
Hi, I'm trying to import a Rockwell/AB EDS to Beckhoff but I'm not sure how to import/install the EDS. It is a PowerFlex 525 EDS. Is there a way...
Replies
1
Views
83
I want to communicate my Q series PLC with Factory IO using GX works 2 software, I want to use modbus as server and the ips are as follows plc...
Replies
0
Views
55
Hi everyone. I'm trying to read values from a Loadcell with a 2080-TC card. I know the 2080-TC is a thermocouple card but it reads millivolts that...
Replies
4
Views
93
Back
Top Bottom