logix500 tag import to PV800

mike nz

Lifetime Supporting Member
M
Join Date
May 2008
Location
Auckland
Posts
9
Hi,
I am trying to import tags from a micrologix 1400 to a PV800 in CCW.
CCW gives the option of micro800 or compactlogix 5370 in the tag editor. Not micrologix or SLC500. Is there a way to import these tags?
I am using version 12.00 of CCW
Thanks
Mike
 

Similar Topics

D
Tag Database in RSLogix500?
Striclty speaking, does RSLogix 500 actually have a tag database the same as 5000? I didn't think that the I/O's in 500 were contained in an...
Replies
8
Views
13,074
Mickey
Mickey
J
Logix500 Axis_Servo_Drive tag explaination
I'm looking for a document that explains all the tags associated with the Axis_Servo_Drive tag. This is the tag that shows up in Logix5000 once...
Replies
2
Views
2,228
jonfarrugia
J
A
Migrating Program from S7-300 to RSLogix500 & Migration from CompactLogix to RSLogix500
So basically i have 2 queries : 1. I have a program file of S7-300 PLC which i want to migrate in RSLogix500.In short i want to convert my simatic...
Replies
14
Views
169
padees
P
G
Logix500 to Fanuc R30iB Ethernet
I've got a Micrologix 1100 with ethernet and I'm trying to configure communications to a Fanuc R30iB controller. I'm pretty sure you have to set...
Replies
0
Views
107
gforkner70
G
B
RSLogix500 firing input from a binary bit
So here's my situation, I have been tasked with modifying the logic to mimic a button press in the PLC. I have two identical machines however one...
Replies
6
Views
543
JeremyAdair87
J
Back
Top Bottom