Hi,
I have spent half my day with fever trying to figure out the SM 1232 AQ4 in TIA Portal.
I have configured the output chanel0(QW144) to voltage. I have downloaded hw config and restarted PLC.
I try changing the output value 0-27648
If I only have a multimeter connected it reads 0V no matter what.
If I have the 0-10V input of my valve amplifier connected and my multimeter in paralell it reads 0-4V. This is where I would like to see 0-10V.
All led are green. No error in diagnostics. What am I missing??
I have spent half my day with fever trying to figure out the SM 1232 AQ4 in TIA Portal.
I have configured the output chanel0(QW144) to voltage. I have downloaded hw config and restarted PLC.
I try changing the output value 0-27648
If I only have a multimeter connected it reads 0V no matter what.
If I have the 0-10V input of my valve amplifier connected and my multimeter in paralell it reads 0-4V. This is where I would like to see 0-10V.
All led are green. No error in diagnostics. What am I missing??