Luma-Logic PLC
- Thread starter cirtcele
- Start date
allscott
Member
- Join Date
- Jul 2004
- Posts
- 1,332
Yes I do, unfortunatley it was 12 years ago and I have slept since then. 
These PLC's were made by Westinghouse. Try googling Westinghouse and Numa Logic. These have been discussed here before as well.
I hope you don't have anything that is still running with these. If you post a specific question, or some code it might jog my (or someone elses) memory and maybe we can help you out.
These PLC's were made by Westinghouse. Try googling Westinghouse and Numa Logic. These have been discussed here before as well.
I hope you don't have anything that is still running with these
. If you post a specific question, or some code it might jog my (or someone elses) memory and maybe we can help you out.Similar Topics
Hello, I´m having a problem trying to program in Ladder. An output should be trigged by two possible contacts. Take a look on the printscreen...
I got my PanelView Plus 7 working with a Micrologix 1500. How would I connect my laptop to the PanelView to view the ladder logic while operating...
Hello,
I am trying to replicate a piece of logic on the PLC5 onto an SEL RTAC. I am using ladder on SEL and FBD. I am having issue on the ladder...
Hello again..trying something on an existing poorly written program and just wanted to double check something
system is an A-B MicroLogix 1200
In...
Good morning fellow sea captains and wizards,
I am being asked to do the above and obtain 4 values from each slave, I know about the MRX and MWX...