chavak
Member
- Join Date
- Jul 2002
- Posts
- 752
Hi Everybody,
Need help on this subject. I want to have machine error messages generated in the PLC to display in the Panelview 'first in first out'.
Panelview will only be displaying one message at a time, when the operator resets the particular fault, next one pops up and so on. I an using SLC5/04 with Panelview 1000. There are altogether 38 error messages the PLC is monitoring for. Somebody told me to try FFL commandbut I never used it,,(he doesn't used it either). Altough I tried to explore on it, doesn't work well. If anyone can give me some clues or even sample ladder will be greatly appreciated.
ThankYou in advance
Need help on this subject. I want to have machine error messages generated in the PLC to display in the Panelview 'first in first out'.
Panelview will only be displaying one message at a time, when the operator resets the particular fault, next one pops up and so on. I an using SLC5/04 with Panelview 1000. There are altogether 38 error messages the PLC is monitoring for. Somebody told me to try FFL commandbut I never used it,,(he doesn't used it either). Altough I tried to explore on it, doesn't work well. If anyone can give me some clues or even sample ladder will be greatly appreciated.
ThankYou in advance