AutomationTechBrian
Lifetime Supporting Member
Update: I'm planning to get two more of the EDS-408A and form a "Turbo Ring". I'll put one in each of the extruder panels, and connect them all together. There are several YouTube videos about setting them up. I didn't see much in stock during a Google search, but I hand the purchasing off to another guy who does that. I'll set this aside until they come in.
...although I'll check on upgrading the firmware on the one we have.
Thanks for all the replies!
...although I'll check on upgrading the firmware on the one we have.
Thanks for all the replies!