MASTERK instruction help

[rainbowtroutXD]

I have a masterk 200s and i am upgrading to a productivity 2000 from automation direct The masterk uses a PUT/GET instruction and i cannot figure out what to use as an alternative. Attached is an image of the original program and an explanation of how it works but how would i re write this in newer software that does not use PUT/GET? I'm lost at this point. the analog card is attached to two loadcell transmitters.

 

[parky]

PUT & Get put or gets data from shared ram i.e. special modules I suppose it's the equivelent of the Mitsubishi FROM/TO instruction that read or write to the buffer memories of the special cards like analogue modules or communication units.